Zoom B2 FOUR Quick Start Guide

Z2I-4829-01
ZOOM CORPORATION
4-4-3 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 Japan
zoomcorp.com
Product names, registered trademarks and company names in this document are the property of their respective companies.
All trademarks and registered trademarks in this document are for identification purposes only and are not intended to infringe
on the copyrights of their respective owners.
Troubleshooting
The unit will not power on
→
Conrm that the POWER switch is on.
→
Check the connections.
There is no sound or output is very quiet
→
Check the connections.
→
Adjust the levels of the effects.
→
Adjust the output volume.
→
If an expression pedal is being used to adjust the
volume, adjust the pedal position until the volume
level is suitable.
→
Turn off the tuner.
There is a lot of noise
→
Conrm that nothing is wrong with the instrument
cable.
→
Use a genuine AC adapter (ZOOM AD-16).
An effect cannot be selected
→
If the effect processing power is being exceeded,
“PROCESS OVERFLOW” will appear on the display.
When “PROCESS OVERFLOW” appears for an effect, it
will be bypassed.
Expression pedal does not work well
→
Check the expression pedal (ZOOM FP02M) connec-
tion.

Zoom B2 FOUR Specifications

General

Type	Bass Multi-Effects Processor
MIDI I/O	No
Presets	50 user presets, 50 factory presets
Amp Modeling	Yes
Inputs	1 x 1/4" Instrument
Power Source	4 x AA batteries
Display	LCD
Outputs	1 x 1/8" headphone output