Zoom 2020 User Manual

Overview of the controls and indicators on the front of the ZOOM Player 2020.

Details of the input/output jacks and connectors on the rear of the unit.

Illustrates connecting the 2020 to a single guitar amplifier for mono output.

Shows how to connect the 2020 to two amplifiers for stereo sound.

Guides connecting the 2020 to recording equipment via the headphone output.

Demonstrates setting up the 2020 for individual practice using headphones.

Instructions on how to choose and activate presets and user patches.

How to modify the final output volume for the selected patch in Play mode.

Temporarily disabling all effects in a patch to hear the dry signal.

Explanation of what constitutes a patch, including effect modules and settings.

Steps to switch from Play mode to Edit mode for patch modification.

Describes the information displayed on the unit when in Edit mode.

Process of selecting and adjusting parameters for effect modules within a patch.

How to individually enable or disable effect modules while editing a patch.

Function to temporarily revert to the patch's state before editing began.

Procedure for saving modified patch settings to memory.

Explains the Compressor and Distortion effects, their types, and parameters.

Details the Equalizer and Wah effects, including their parameters and operations.

Covers Modulation effects like Pitch, Phase, Flanger, Tremolo, Step, and Chorus.

Explains the Mono and Ping-pong Delay effects and their adjustable parameters.

Details the Reverb and Early Reflections effects, including patch level settings.

How to recall specific factory preset patches to their original settings.

Procedure to reset all user and preset patches to factory default.

Guide to using the optional FP01 foot pedal for volume or wah control.

Instructions for using the optional FS01 foot switch for mode switching.