13
①
Output jack section
Ground connection can be
enabled/disabled for the BAL-
ANCED OUTPUT jack.
• CONNECT (
): This con-
nects the ground pin to the
ground.
• LIFT (
): This disconnects
the ground pin from the
ground. This is useful if noise
is caused by a ground loop.
BALANCED OUTPUT jack: Con-
nect this to a PA system.
AMP/LINE [PHONES] jack: Con-
nect this to a bass amp, moni-
tor speakers or headphones.
②
Input jack section
Connect bass guitars here.
INPUT-1/2 jacks: Connect
basses to these.
Impedance selection switches
1/2: Set these to suit connected
basses.
③
EXTERNAL LOOP jacks
An external effect can be connected
here.
Connect the SEND jack to the
input jack of the external effect.
Connect the RETURN jack to
the output jack of the external
effect.
④
SD card slot
Loading an SD card makes the following
possible.
•
Loops can be saved and their record-
ing times made longer
•
Impulse response data can be loaded
•
The B6 can be used as a card reader
•
The rmware can be updated
Cards that conform to SD, SDHC or
SDXC specications are supported.
⑤
POWER switch
This turns the power on/off.
⑥
DC 9V AC adapter connector
Connect the dedicated AC adapter
(ZOOM AD-16) here.
⑦
MASTER knob
Use this to adjust the volume of the B6.
⑧
AUX IN jack
Connect a portable music player or simi-
lar device here.
⑨
CONTROL IN jack
Connect an expression pedal (ZOOM
FP02M) here, and use it to adjust a pedal
effect.
⑩
REMOTE connector
Connect a ZOOM BTA-1 or other dedi-
cated wireless adapter here.
This enables wireless control of the
B6 from an iPhone/iPad using the iOS/
iPadOS Handy Guitar Lab for B6 app.
⑪
USB (Micro-B) port
Connecting a computer makes the fol-
lowing possible.
•
The B6 can be used as an audio inter-
face
•
The B6 can be operated using Guitar
Lab
•
The B6 can be used as a card reader
To Next Page
Loading...
Need help?
General
