Zoom B6 User Manual

15
Use the tuner.
Set the tone and other characteristics
of the output sounds for each input
channel.
Turn the preselect function on/off.
Show patch memory names in large
characters for selection on the touch-
screen.
Show the effects used in the patch
memory on the touchscreen.
Use the footswitches to select the
four patch memories in the bank.
Use the looper.
Guitar Lab and USB interface functions
The Guitar Lab (computer) and the Handy Guitar Lab for B6 (iOS/iPadOS) apps can be used
to manage patch memories and to edit and add effects. The B6 can also be used as a com-
puter audio interface.
USB 2.0 Micro-B
• A USB cable that supports data transfer
is necessary. USB bus power is not sup-
ported.
iOS/iPadOS device
Computer
(Mac/Windows)
ZOOM BTA-1 or
other dedicated
wireless adapter

Zoom B6 Specifications

General

Software	Zoom Guitar Lab
Phantom Power	No
Sample Rate	44.1kHz
Amp Modeling	Yes
Looper	Yes
MIDI I/O	In/Out
USB	1 x USB-C
Computer Connectivity	USB
Power Source	AC adapter (included) or 4 x AA batteries
Category	Bass Effects Processor
Compatibility	Mac and Windows