5
■ Top
① ② ③
①
DC 5V (USB Type-C) connector
• A dedicated AC adapter (ZOOM AD-17) can
also be connected here to use AC power.
• This can also be connected to a computer
for use. Files can be moved, and F2/F2-BT
settings can be made using the F2 Editor
app.
②
OUTPUT jack
Connect headphones, for example, here.
③
INPUT jack
Connect a lavalier mic here.
Preparing for use
In order to use an F2/F2-BT, an application must be installed on a computer and initial
settings for it must be made. See page 9 for details about installing the application.
■ Turn the power on
After turning the power off, open the battery compartment cover
and install batteries. When the power is on, the remaining battery
charge can be checked with the BATT LED.
BATT LED
Remaining
battery charge
Lit green
Full
Empty
Lit orange
Blinking orange
Blinking red
HINT
An AD-17 AC adapter can also be used.
NOTE
• Use only one type of batteries (alkaline, NiMH or lithium) at a time.
• If the BATT LED does not light after the power is turned on, set the power to OFF and install
new batteries.
• After installing the batteries, set the battery type correctly. Use F2 Editor or F2 Control (F2-BT
only) to set this.
AAA batteries
To Next Page
Loading...
Need help?
General
