7
Display overview
■
Home Screen
Status icons
Stopped
Recording
Paused
Playing back
Recording/playback
sample rate
Clipping indicator
Level meter
Track number
Red: Input enabled
Green: Playback track enabled
Gray: Input disabled
Frame rate
INT: Internal timecode enabled
EXT: External input timecode enabled
Mono
Stereo
Ambisonic
Counter
During recording: Elapsed/remaining recording time)
During playback: Elapsed/remaining playback time)
Power type and remaining amount
USB: Power supply connected to port
EXT: L battery
AA: AA batteries
Recording/playback timecode
Recording/playback take name
When stopped, press and hold
to show the name that will be
given to the next recorded take.
Adjacent track numbers are con-
nected to show input link settings.
The has two Record setting modes, Linear (16/24-bit) and Float (32-bit), with the following character-
istics.
Linear: This mode records ordinary 16/24-bit WAV les. Adjust input (trim) levels so that the clip indica-
tors do not light when recording. The level meters show input levels after adjustments.
Float: This mode records 32-bit oat WAV les. Adjusting input levels is unnecessary. As long as maxi-
mum input levels are not exceeded, both quiet and loud sounds can be recorded with high quality.
The level meters show levels after adjustments by [Track
] knobs.
HINT
Some of the screen will appear differently when the recording mode is Float (32 bit).
NOTE
To Next Page
Loading...
Need help?
General
