Zoom F6 - Loading SD Cards; Turning the Power on and off

5
Loading SD cards
1.
Open the SD card slot cover, and insert an SD card.
To remove the SD card, push it further into the slot and then pull it out.
HINT
Before using SD cards that have just been purchased or that have been formatted on a computer, they
must be formatted by the
. To format an SD card, use Menu > SYSTEM > SD Card > Format.
NOTE
Turning the power on and off
1.
Press and hold to turn the power on.
Press and hold to turn the power off.
HINT
• If “No Card!” appears on the display, conrm that an SD card is inserted properly.
• If “Card Protected!” appears on the display, the SD card write-protection is enabled. Slide the lock
switch on the SD card to disable write-protection.
• If “Invalid Card!” appears on the display, the card is not formatted correctly. Format the card or use a
different card.
NOTE