Using SD card recording and audio interface functions at
the same time
In addition to SD card recording, a computer can also be used to record a backup.
To record a backup to a computer using 32-bit float format, the recording mode (bit depth) must be set to
“Float (32bit)”.
Setting the recording mode (bit depth)
1. Press .
2. Use and to select “REC”, and press .
3. Use and to select “Mode”, and press .
4. Use and to select “Float (32bit)”, and press .
NOTE
SD card recording and audio interface functions can be used with 32-bit float format at the same time only if
“Float (32bit)” is selected.
7