Zoom G11 - Adjusting the Amp

7
■
Adjusting the amp with the touchscreen
Touch on the Home Screen.
Touch a switch to change
its setting.
Drag a knob up and down
to adjust it.
Amp name
•
The parameters that can be adjusted and set depend on the amp type. (Some parameters can
only be adjusted and set using the touchscreen.)
•
Adjustments to the values of settings made in the AMPLIFIER section are reected on the touch-
screen.
Adjusting the amp
Use the amp section to adjust the amp selected with the patch memory.
1.
Press .
This turns the amp ON/OFF. (It lights when ON.)
The name of the selected amp is shown on the
AMPLIFIER section display.
2.
Turn .
These knobs adjust, from the left, the gain, bass
frequencies, middle frequencies, treble frequen-
cies, presence and volume.
When adjusting the amp, parameter values are
shown on the AMPLIFIER section display.
When the AUTO SAVE function is ON, changes to patch memories will be automatically
saved. (This function is ON by default.)
HINT
1 21, 2