Zoom G3n - Using the Looper: Setting Functions; Setting Looper Recording Time; Setting the UNDO Function

38
39
Setting the looper
■ Setting the looper recording time
• Turn for the unit using the looper.
NOTE
• ThesettingoptionsincludeMANUALand1–64quarternotes.
• Therecordingtimeforthemonolooperisfrom1.5to80seconds(40secondswhenUNDOisON).
• Therecordingtimeforthestereolooperisfrom1.5to40seconds(20secondswhenUNDOisON).
• Settingsthatwillnottintherecordingtimewillbeadjustedautomatically.
• Changingtherecordingtimewilldeletetherecordeddata.
■ Setting the UNDO function
• Turn fortheunitusingtheloopertosetittoON/OFF.
NOTE
When UNDO is ON, the recording time will become as follows.
• Monolooper:40seconds
• Stereolooper:20seconds
Using the UNDO and REDO functions
If UNDO is ON, you can undo the last overdub. You can also use the REDO function to restore the
phrase that the UNDO function deleted.
With 1-unit looper
To undo an overdub, press
for one second during playback. To restore the deleted phrase, press
for one second again.
With 2-unit looper
To undo an overdub, press
for the rst unit twice during playback. To restore the deleted phrase,
press
twice again.
Using the looper