Zoom G3Xn - Troubleshooting; No Sound or Low Volume Issues; Excessive Noise Issues; Effect Malfunction

48
49
Troubleshooting
No sound or very low volume
•ConrmthatthePOWERswitchissetto
“ON”.
•Checktheconnections(
¦
P4–5).
•Adjustthepatchlevel(
¦
P17).
•Adjustthemasterlevel(
¦
P22).
•If you are using the expression pedal
to adjust the volume, adjust the pedal
position until the volume level is suitable.
There is a lot of noise
•Checkshieldedcablesfordefects.
•UseonlyagenuineZOOMACadapter.
An effect is not working
•If limits on effectprocessing capacity,
the number of units or the amount of
resources used are exceeded, effects will
be bypassed and the following message
will appear (
¦
P9).
PROCESSOVERFLOW
Expression pedal does not work well
•Confirm the setting of the connected
pedal (
¦
P41).
•Selectthepedaleffect(
¦
P42).
•Adjustthepedal(
¦
P43).