Operating the Zoom H1n Recorder for Message Banking cont./…
You turn off the Zoom H1n the same way you turn it on.
To turn off the Zoom H1n:
On the right side of the Zoom H1n, slide
the Power switch all the way to the left.
Hold the Power switch to the left for about
1 second, then release.
The switch will return to the middle.
The screen will say Goodbye see you! When it is off the screen will go blank.
2. Recording a Message
To start recording a message:
Press and release the Record button on the front of
the Zoom H1n.
When the Zoom H1n is in record mode:
o A large black dot will appear on the left side of the
screen.
o The number beside this dot indicates the duration of the
recording so far.
o The REC indicator light beside the Record button will be
solidly RED.
To stop recording at the end of a message, it is the same action:
Press and release the Record button on the front of the
Zoom H1n.
o Once you press the Record button, start speaking promptly to
avoid empty space at the beginning of your message.
Likewise, stop recording promptly when you finish speaking.
o Speak only one message per recording.
For further information see
Recording Messages for Message Banking