Zoom h1n - Deleting One Recorded Message

Operating the Zoom H1n Recorder for Message Banking cont./…
5/8
5. Deleting One Recorded Message
To delete ONE recorded message:
Play the message recording that you want to delete (see page 3).
In play or pause mode, press the Delete button
on the right side of the Zoom H1n.
A Delete File menu will appear on the screen.
The screen will show the recording number and menu
options Delete and Cancel.
A ü select symbol beside Cancel indicates that it is
highlighted as the default menu option.
Along the bottom of the screen are BACK, UP and DOWN
arrow symbols and a ü select symbol.
Under the screen there is a row of press down buttons that correspond to these
screen options in this mode.
To cancel the deletion if you realise that you selected the
wrong message recording:
Press and release the AUTOLEVEL button, which is the
1st button from the right under the screen.
To continue with the deletion:
Press and release the LO CUT button, which is the 2
nd
button from the left under the screen.
The ü on screen is now beside Delete.
To confirm the deletion:
Press and release the AUTOLEVEL button, which is the
1st button from the right under the screen.
You will see a timer icon on screen while the file is
deleting then the screen will say Done. This means
your message recording has been successfully
deleted.