Zoom h1n - Recording with the Self Timer

Recording with the SELF TIMER
Recording starts automatically after the set time passes.
1. While pressing , press to set the timer.
HINT
The timer can be set to OFF, 3SEC, 5SEC or 10SEC.
2. Press .
This starts the self timer countdown, and the REC LED blinks.
HINT
During the countdown, you can press again to start recording immediately.
3. Press to end recording standby or stop recording.
NOTE
• This cannot be used with the AUTO REC function. When the SELF TIMER is enabled, AUTO REC will be
disabled.
• This cannot be used with the PRE REC function. When the SELF TIMER is enabled, PRE REC will be
disabled.
26