Zoom H4n Pro - Page 13

1
Press.
2
Select MODE and press.
3
Select among STEREO, 4CH
and MTR modes and press.
13
Switching and con rming modes
Be sure to select the appropriate mode for your application.
Note: To engage
STAMINA mode,
use the switch
located in the battery
compartment.
STEREO
4CH
MTR
Mode indicators
STAMINA mode
indicator
HINT:
Mode con rmation
• The current mode is indicated by a mode indicator LED on
the front panel.
• The H4n Pro will power up in the same mode it was in
when turned off.
• When starting up for the  rst time, the default mode is
STEREO.
Press the MENU button for
more than 2 seconds, and start
operation from the top screen.