EasyManuals Logo

Zoom H6essential Firmware Update Guide

Zoom H6essential
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
12.
Slide toward again.
The update will be executed automatically, and the REC indicator will blink slowly.
After about 1 minute, a completion screen will appear.
NOTE
During the firmware update, do not turn the power off or remove the microSD card.
If the update fails, the REC indicator will blink rapidly. If this happens, turn the power off once and confirm that
the microSD card is loaded correctly. Then, turn the power on and try updating again.
13.
Turn the power off.
NOTE
If the firmware update failed, starting the unit might not be possible and the REC indicator might stay lit.
Turn the power off and repeat the steps from the beginning.

Table of Contents

Other manuals for Zoom H6essential

Preview: Operation Manual
Operation Manual142 pages
Preview: Quicktour
Quicktour19 pages
Preview: Manual
Manual21 pages

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zoom H6essential and is the answer not in the manual?

Zoom H6essential Specifications

General IconGeneral
Recorder Channels6
Input Channels6
Recording MediaSD, SDHC, SDXC cards
DisplayBacklit LCD
USB InterfaceUSB Type-C
MicrophoneInterchangeable
Memory Card SupportSD, SDHC, SDXC
Audio File FormatsWAV
Sample Rates44.1 / 48 / 96 kHz
ConnectivityUSB Type-C
Power SourceAA batteries or USB power
Built-in MicrophonesInterchangeable
Headphone Output3.5mm stereo mini jack

Related product manuals