Convenient Recording Functions
ZOOM H2
38
●
LIMIT3 (STUDIO)
This is a limiter setting suitable for studio
recording.
Use the
3
(REW)/
2
(FF) keys to move the
cursor to the desired setting, and press the
5
(REC) key. The setting is accepted and the
display returns to the main menu.
To cancel the setting and return to the main
menu, simply press the
4
(MENU) key.
4.
Return to the top screen.
Repeatedly press the
4
(MENU) key until
the stereo mode or 4-channel mode top screen
appears again.
Attenuating the low
frequencies
The H2 incorporates a low-cut filter that is
effective in removing wind noise during
outdoor recording or pop noise when
recording a vocalist. To activate the filter,
proceed as follows.
1.
Bring up the main menu screen.
At the stereo mode or 4-channel mode top
screen, press the
4
(MENU) key.
2.
Bring up the LO CUT screen.
Repeatedly press the
3
(REW)/
2
(FF)
keys to move the cursor to "LO CUT" and
press the
5
(REC) key.
3.
Activate the low-cut filter.
Use the
3
(REW)/
2
(FF) keys to move the
cursor to "ON" and press the
5
(REC) key.
The setting is accepted and the display
returns to the main menu.
To cancel the setting and return to the main
menu, press the
4
(MENU) key.
H2-E.fm 38 ページ ２００７年７月１１日 水曜日 午後３時１９分
To Next Page
Loading...
Need help?
General
