Other Functions
ZOOM H2
83
Specifying the battery type
The H2 shows the remaining battery capacity
using a segment indicator on the display. The
accuracy of this indicator can be increased by
specifying the battery type as described
below.
1.
Bring up the main menu screen.
At the stereo mode or 4-channnel mode top
screen, press the
4
(MENU) key.
2.
Bring up the BATTERY TYPE
screen.
Repeatedly press the
3
(REW)/
2
(FF)
keys to move the cursor to "BATTERY" and
press the
5
(REC) key.
The following settings are available.
●
ALKALI (default)
Select this when using alkaline or oxyride
batteries.
●
Ni-MH
Select this when using rechargeable nickel-
hydride batteries.
3.
Select the battery type setting.
Use the
3
(REW)/
2
(FF) keys to select the
setting and press the
5
(REC) key. The
setting is accepted and the display returns to
the main menu screen.
HINT
To cancel the change and return to the
preceding screen, press the
4
(MENU) key
without pressing the
5
(REC) key.
4.
Return to the top screen.
Repeatedly press the
4
(MENU) key until
the stereo mode or 4-channel mode top screen
appears again.
H2-E.fm 83 ページ ２００７年７月１１日 水曜日 午後３時１９分
To Next Page
Loading...
Need help?
General
