Using the Metronome Function
ZOOM H2
70
At this screen, you can select the beat pattern
from 0/4 to 8/4 or 6/8 (0/4 results in
unaccented sound).
Move the cursor to the desired item and press
the
5
(REC) key. The setting is accepted and
the METRONOME screen appears again.
5.
Set the volume level for the
metronome/pre-count.
Move the cursor to "LEVEL" and press the
5
(REC) key to bring up the
"METRONOME LEVEL" screen.
At this screen, you can select the metronome
volume in the range from 0 - 10.
Use the
3
(REW)/
2
(FF) keys to set the
volume and press the
5
(REC) key. The
setting is accepted and the METRONOME
screen appears again.
HINT
For any item, you can return to the
METRONOME screen without making a setting
by pressing the
4
(MENU) key instead of the
5
(REC) key.
6.
Return to the top screen.
Repeatedly press the
4
(MENU) key until
the stereo mode or 4-channel mode top screen
appears again.
H2-E.fm 70 ページ ２００７年７月１１日 水曜日 午後３時１９分
To Next Page
Loading...
Need help?
General
