11
Troubleshooting
The unit will not power on
→
Check the connections.
→
If using batteries, connect a cable to the INPUT
jack.
There is no sound or output is very quiet
→
Check the connections.
→
Adjust the levels of the effects.
→
Adjust the output volume.
→
Conrm that the tuner output setting is not
“MUTE”.
There is a lot of noise
→
Conrm that nothing is wrong with the instru-
ment cable.
→
Use a genuine AC adapter (ZOOM AD-16).
An effect cannot be selected
→
“MAX EFFECTS. DELETE ONE.” will appear on
the display when trying to add an effect that
would exceed the maximum combination limit.
Delete one effect before adding another one.
To Next Page
Loading...
