Zoom MultiStomp MS-50G Parameter Guide

10
11
Effect Types and Parameters
Table 1 CAB Parameter
Type Modeled cabinet and speakers
FD COMBO 2x12 Fender Twin Reverb ('65) cabinet with 2x12-inch Jensen speakers
DLX-R 1x12 Fender Deluxe Reverb cabinet with 1x12-inch Jensen speaker
US BLUES 4x10 Fender Tweed Bassman cabinet with 4x10-inch Jensen speakers
VX JMI 2x12
Early model British combo amp cabinet with 2x12-inch Celestion Alnico speakers
TW ROCK 1x12 Two Rock Emerald 50 cabinet with 1x12-inch Fane speaker
MS 1959 4x12 Marshall 1959 B cabinet with 4x12-inch Celestion speakers
DZ DRIVE 4x12 Diezel Herbert cabinet with 4x12-inch Celestion speakers
ALIEN 4x12 Engl Invader cabinet with 4x12-inch Celestion speakers
OFF No cabinet used.
Table 3 OUT Parameter
Parameter value Meaning
LINE
Use when connected to headphones, speakers or line level inputs.
COMBO FRONT Use when connected to an ordinary combo amp input
STACK FRONT Use when connected to an ordinary stack amp input
COMBO POWER AMP Use when connected to an ordinary combo amp return
STACK POWER AMP Use when connected to an ordinary stack amp return
Table 2 Scale Parameter
Setting Scale used Interval Setting Scale used Interval
−6
Major
6th down 3
Major
3rd up
−5 5th down 4 4th up
−4 4th down 5 5th up
−3 3rd down 6 6th up
−m
Minor
3rd down
m 3rd up
MS-50G EFFECT LIST-E-1

Zoom MultiStomp MS-50G Specifications

General

Simultaneous Effects	6
Display	LCD
Sampling Frequency	44.1 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Patches	50
Input	1/4"
Output	1/4"
Power	9V DC
Weight	350 g (without batteries)
Frequency Response	20Hz - 20kHz
Power Supply	Batteries: AA/LR6 battery x 2
Battery Life	Approx. 6 hours (alkaline batteries)
Effect Types	Delay, Reverb, Modulation, Distortion, EQ, Filter, Dynamics