To Next PageTo Next Page
Need help?Do you have a question about the Zoom G6 and is the answer not in the manual?
General| Amp Models | 22 |
|---|---|
| IR Loader | Yes |
| Pedal Type | Multi-effects |
| Amp Modeling | Yes |
| Bluetooth | No |
| Display | 4.3-inch color touchscreen |
| Looper | 2 hours |
| Inputs | 1 x 1/4" (aux in) |
| Outputs | 2 x 1/4" (main out), 1 x 1/4" (phones) |
| Power Supply | 9V DC 500mA power supply (included) |
| Effects Types | Delay, Reverb, Modulation, Distortion |
| Processor | Custom Zoom ZFX-IV DSP |
| Weight | 1.9 kg |
Explains the signal path of the guitar sound through the device.
Describes how patch memories and banks are stored and organized.
Details the four different play modes available on the G6.
Shows and explains the different screens displayed during operation.
Introduces the main menu for accessing all G6 functions.
Describes how to navigate back to the previous screen using the touchscreen.
Explains how to scroll through lists displayed on the touchscreen.
Identifies and explains the controls on the top panel of the G6.
Identifies and explains the connections and controls on the back panel of the G6.
Lists and explains the functions of icons found on the Menu Screen.
Details how to connect the G6 to a computer via USB.
Explains how to connect wirelessly using a dedicated adapter.
Provides important notes regarding SD card compatibility and usage.
Step-by-step instructions for powering on the G6 unit.
Step-by-step instructions for powering off the G6 unit.
Provides technical details about the master level setting range.
Offers a shortcut for accessing the OUTPUT EQ screen via the Menu Screen.
Suggests using the Menu Screen to activate EFFECT BOARD mode.
Indicates that the Menu Screen can activate BANK/PATCH mode.
Notes that the Menu Screen can activate MEMORY mode.
Mentions accessing LOOPER mode via the Menu Screen.
Explains behavior when maximum recording time is reached or set.
Important notes regarding pre-count function and AUX IN jack usage.
Tips on using SD cards, rhythm quantization, and mode switching during playback.
Details how to set the length of recorded phrases.
Notes on setting options, stereo/mono recording time, and data deletion.
Specifies the adjustable range for looper volume.
Clarifies recording time differences and SD card limitations for stereo/mono.
Explains how looper placement affects sound crafting.
Guides on creating and saving loops to an SD card.
Notes on loop naming, deletion, status display, and tempo changes.
Instructions for loading custom audio files as loops.
Explains automatic saving via AUTOSAVE and manual saving.
How to toggle effects ON/OFF directly on the screen.
Links to tempo adjustment, Guitar Lab, and effect management.
Describes effects that use two spaces and have special footswitch assignments.
Describes effects that use two spaces and have special footswitch assignments.
Notes on the maximum number of effects and display indicators.
How to toggle effects ON/OFF directly on the screen.
How to change amp or effect types via the menu.
How to reorder effects within a patch memory.
How to add new effects to a patch memory.
How to remove effects from a patch memory.
How to edit parameters of individual effects.
How to rename patch memories using the on-screen keyboard.
How to adjust the output level for each patch memory.
Lists allowed characters for patch memory names.
Explains manual saving of patch memories, overwriting, and saving to different locations.
Instructions for reordering banks.
Warning about deleting banks also deleting associated patch memories.
How to use the expression pedal to control effects.
How to activate the tuner to tune a guitar.
How to adjust the reference pitch for tuning.
How to activate and play built-in rhythms.
How to choose and activate specific rhythm patterns.
How to assign impulse responses to patch memories.
Instructions for installing the necessary driver for Windows.
How to adjust the recording level sent to the computer.
How to set the balance between computer output and direct signal.
How to enable or disable automatic patch memory saving.
How to view the current firmware and preset versions.
How to check the available space on the SD card.
