Setting the looper
Various looper settings can be made.
Setting the recording time
The length of the recorded phrase can be set.
1.
Turn or drag the TIME knob up or down on the Looper Control Screen (
→
page 27).
READY
Setting Explanation
MANUAL
Recording will continue until stopped manually or the maximum re-
cording time is reached.
♩
× 1–64
Set the value to 1–64 quarter notes. The actual recording time de-
pends on the BPM (tempo) setting (
→
“Adjusting the master tempo”
on page 55).
The recording time (seconds) = 60 ÷ BPM × quarter notes.
When the set recording time is reached, recording will stop and loop
playback will start.
NOTE
• The setting options include MANUAL and 1–64 quarter notes.
• The recording time for the looper is 2–45 seconds when stereo and 2–90 seconds when mono. To switch
between stereo and mono, see “Setting to stereo or mono” on page 34.
• Settings that would exceed the maximum recording time will be adjusted automatically.
• Changing the recording time will delete the recorded data.
32
To Next Page
Loading...
