Zoom G6 - Using Send and Return

Using the send and return
External effects can be used by connecting them to the send and return jacks.
The send/return positions can be set as desired and saved in each patch memory.
NOTE
The send/return is counted as one of the maximum number of the effects in the patch memory. (
→
“Number of
effects in patch memories” on page 43)
1.
Connect the
G6
to an external effect.
External effect unit
To input jackTo output jack
2.
Select the patch memory in which you want to set a send/return.
3.
Touch on the Menu Screen.
4.
Drag to the position where you want to set the send/return. Then, touch .
84