Zoom G6 - Page 85

5.
Touch the send/return setting. Then, touch OK.
Refer to the following applications when selecting the setting.
■FxLoop
A signal will be sent to the external effect from the position set on the USE SEND/RETURN screen and a
signal will be returned to the same position.
■Send
A signal will be sent to the external effect from the position set on the USE SEND/RETURN screen.
■Return
A signal will be returned from the external effect to the position set on the USE SEND/RETURN screen.
NOTE
• To delete a send/return, see “Deleting effects” on page 49.
• To change a send/return, see “Replacing effects” on page 41.
HINT
Sends/returns can also be added on the CHANGE AMP/EFFECTS screen (
→
“Adding effects” on page 47)
85