Zoom G6 User Manual

Using expression pedals
If an effect in the PEDAL category (pedal effect) is selected in a patch memory, the application of the effect can
be controlled by an expression pedal.
Using the built-in pedal
The built-in expression pedal can be used to change the application of the effect.
321 3
Touchscreen
1.
Select a patch memory that has a pedal effect you want to adjust.
Press repeatedly to select , or touch on the Menu Screen to check
the selected effect in the patch memory.
Pedal effect
• To change the pedal effect, see “Replacing effects” on page 41.
• To add a pedal effect, see “Adding effects” on page 47.
NOTE
When an external pedal is connected, two effects from the PEDAL category can be used. (
→
“Using an external
pedal” on page 72)
68

Zoom G6 Specifications

General

Amp Models	22
IR Loader	Yes
Pedal Type	Multi-effects
Amp Modeling	Yes
Bluetooth	No
Display	4.3-inch color touchscreen
Looper	2 hours
Inputs	1 x 1/4" (aux in)
Outputs	2 x 1/4" (main out), 1 x 1/4" (phones)
Power Supply	9V DC 500mA power supply (included)
Effects Types	Delay, Reverb, Modulation, Distortion
Processor	Custom Zoom ZFX-IV DSP
Weight	1.9 kg