Using an external pedal
When an external pedal is connected, two effects from the PEDAL category can be used.
You can set a pedal effect to be assigned to the connected pedal.
1.
Touch on the Menu Screen.
2.
Touch the EXTERNAL PEDAL switch to turn it ON.
Touching this toggles it ON/OFF.
Setting Explanation
OFF External pedal use is disabled.
ON External pedal use is enabled.
3.
Select the patch memory for which you want to set an external pedal.
4.
Touch on the Menu Screen.
After appears, follow the instructions in “Adding effects” on page 47 to add a pedal effect (effect in
the PEDAL category).
EXT will appear on
the pedal effect used
with the external
pedal.
72
To Next Page
Loading...
