Making unit settings
Setting the AUTOSAVE function
When the AUTOSAVE function is ON, patch memories will be saved automatically when their contents are
changed.
1.
Touch or on the Menu Screen.
2.
Touch the AUTOSAVE switch to set it to ON/OFF.
Touching this toggles it ON/OFF.
Setting Explanation
ON This turns on the AUTOSAVE function.
OFF This turns off the AUTOSAVE function.
HINT
Patch memories will not be saved automatically if the AUTOSAVE function is OFF.
When the content of a patch memory has been changed, will appear at the top right of the screen, showing
that it is different from the saved settings.
Touch to open the screen for saving patch memories, and save it as necessary. (
→
“Saving patch memo-
ries” on page 56)
94
To Next Page
Loading...
