Using audio interface functions
The
G6
can be used as a 2-in/2-out audio interface.
A total of 2 channels of audio signals can be sent from the
G6
after effect processing to a computer.
From a computer, 2 audio signal channels can be input after effect processing.
See “Signal flow” on page 6 for input and output positions.
Installing the driver
■ Windows
1.
Download the G6 Driver to the computer from zoomcorp.com.
NOTE
The latest G6 Driver can be downloaded from the above website.
2.
Launch the installer and follow its instructions to install the G6 Driver.
NOTE
See the Installation Guide included in the driver package for detailed installation procedures.
■ Mac or iOS/iPadOS device
No driver is necessary for use with a Mac or iOS/iPadOS device.
89
To Next Page
Loading...
