Turning effects on and off while playing
In EFFECT BOARD mode, the effects and amp used in the patch memory are shown on the touchscreen and can
be turned on and off using the footswitches.
1
3
Touchscreen
1.
Press repeatedly to select .
This activates the
G6
EFFECT BOARD mode where all the effects and the amp used in the patch memory
can be seen at a glance.
Current patch memory
HINT
Touching on the Menu Screen will also activate EFFECT BOARD mode.
2.
Touch an effect to enable turning it on/off with a footswitch.
The touched effect is assigned to a footswitch.
Touch again to remove the assignment.
When effects are assigned, the color at the base of the
footswitch changes color according to the category.
21
To Next Page
Loading...
