Zoom G6 - G6 Folder and File Structure

5.
Use the computer to transfer the necessary files.
NOTE
When the PC MODE screen is open, other functions cannot be used and the footswitches and parameter knobs
are disabled.
G6
folder and file structure
Folders and files are created on the
G6
SD card in the following manner.
Root
XXXX.WAV
G6LOOPER
G6IR
XXXX.WAV
XXXX.WAV
G6LOOPER.ZDT
LOOPER001.WAV
LOOPER002.WAV
LOOPER003.WAV
Impulse response WAV files put in this folder can be loaded by the
G6
.
(
→
“Loading impulse response (IR) data” on page 87)
• Loops recorded by the looper are saved in this folder.
(
→
“Creating a loop and saving it to an SD card” on page 37)
• Audio files put in this folder can be loaded as loops in the looper.
(
→
“Selecting loops saved on SD cards” on page 39)
(
G6
looper settings file)
Loops recorded by the looper
Impulse response WAV files
104