Selecting loops saved on SD cards
1.
Touch on the Looper Control Screen (
→
page 27).
2.
Touch a loop to select it.
The selected loop appears on the Looper Control Screen.
The selected loop can be played back and overdubbed.
HINT
To load your own audio files and use them as loops, copy them to the “G6_Looper” folder on the SD card in ad-
vance. (
→
“G6 folder and file structure” on page 104)
The “G6_Looper” folder is created at the top level of an SD card when it is formatted by the
G6
. (
→
“Formatting
SD cards” on page 101)
Audio files in the following format can be loaded.
• Sampling frequency: 44.1 kHz
• Bit rate: 16-bit
• Stereo
39
To Next Page
Loading...
