Zoom MultiStomp MS-50G Parameter Guide

6
7
Effect Types and Parameters
[MOD/SFX]
Tremolo This effect varies the volume at a regular rate.
Knob1 Knob2 Knob3
Page01
Depth 0–100 Rate 0–50
Level 0–150
Adjust the depth of the modulation. Adjusts the rate of the modulation. Adjusts the output level.
Page02
Wave
UP 0–UP 9,
DWN 0–DWN 9,
TRI 0–TRI 9
Sets the modulation waveform.
Phaser This effect adds a phasing variation to the sound.
Knob1 Knob2 Knob3
Page01
Rate 1–50
Color
4 STG, 8 STG,
inv 4, inv 8
Level 0–150
Sets the speed of the modulation. Sets the tone of the effect type. Adjusts the output level.
Page02
TheVibe This vibe sound features unique undulations.
Knob1 Knob2 Knob3
Page01
Speed 0–50 Depth 0–100 Bias 0–100
Sets modulation speed. Sets the depth of the modulation.
Adjusts bias of waveform modulation.
Page02
Wave 0–100 Mode VIBRT, CHORS Level 0–150
Adjusts modulation waveform. Sets effect to vibrato or chorus. Adjusts the output level.
Chorus This effect mixes a shifted pitch with the original sound to add movement and thickness.
Knob1 Knob2 Knob3
Page01
Depth 0–100 Rate 1–50 Mix 0–100
Sets the depth of the modulation. Sets the speed of the modulation.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
Tone 0–10 Level 0–150
Adjusts the tone. Adjusts the output level.
Detune
By mixing an effect sound that is slightly pitch-shifted with the original sound, this effect
type has a chorus effect without much sense of modulation.
Knob1 Knob2 Knob3
Page01
Cent -25–25 PreD 0–50 Mix 0–100
Adjusts the detuning in cents, which
are fine increments of 1/100-semitone.
Sets the pre-delay time of the effect
sound.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
Tone 0–10 Level 0–150
Adjusts the tone. Adjusts the output level.
StereoCho This is a stereo chorus with a clear tone.
Knob1 Knob2 Knob3
Page01
Depth 0–100 Rate 1–50 Mix 0–100
Sets the depth of the modulation. Sets the speed of the modulation.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
Tone 0–10 Level 0–150
Adjusts the tone. Adjusts the output level.
SuperCho This models the sound of a BOSS CH-1 SUPER CHORUS.
Knob1 Knob2 Knob3
Page01
E.LVL 0–120
Rate
0–100
Depth
0–100
Adjusts amount of effec t sound
mixed with original sound.
Sets the speed of the modulation. Adjust the depth of the modulation.
Page02
EQ 0–100
Mode MONO,STR
Adjusts effect tone.
Sets output to mono or stereo (STR).
When stereo, effect sound is output
from L channel and unchanged input
sound is output from R channel.

Zoom MultiStomp MS-50G Specifications

General

Simultaneous Effects	6
Display	LCD
Sampling Frequency	44.1 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Patches	50
Input	1/4"
Output	1/4"
Power	9V DC
Weight	350 g (without batteries)
Frequency Response	20Hz - 20kHz
Power Supply	Batteries: AA/LR6 battery x 2
Battery Life	Approx. 6 hours (alkaline batteries)
Effect Types	Delay, Reverb, Modulation, Distortion, EQ, Filter, Dynamics