Instruction for use of the forklift with the triple pivot battery
1. The pipeline or connector has air leakage
2. Lower level in the oil tank
3. Too much impurity in oil and the oil filter clogged
4. Excessive wear of gear pump
5. The seal ring in the gear pump is damaged.
Weak lifting force
or unable to lift
1. Excessive wear of gear pump
2. Insufficient system pressure
Adjust the safety valve pressure
3. The multi-way valve and valve rod are overworn
Replace or renew valve rod
4. The lifting cylinder leaks inside
5. The safety valve doesn’t reset.
No voltage when
the key switch is
turned on.
1. The key switch is in poor contact.
3. The connector is in poor contact
4.The connector of battery is loose
Tighten the connecting bolt.
When the
acceleration pedal
is depressed, the
forklift doesn’t
move.
2. The connector is in poor contact
3. The direction switch is in poor contact.
4. The speeder has a fault
The lifting motor
doesn’t run
1. The speeder has a fault
2. The lifting switch doesn’t work properly.
4. The connector is in poor contact.
The lifting motor
permanently rotates
1. The lifting switch doesn’t work properly.
The lighting lamp
doesn’t work
properly
2. The connector is in poor contact.
1. The connector is in poor contact.
2. The horn switch is in poor contact.
1. The horn switch is in constant connection.
To Next Page
Loading...
General