What causes the engine temperature to be too high in Zoomlion ZCC1800?
If the engine temperature of your Zoomlion Construction Equipment is too high, it might be that the fan is not turned on correctly. The outside and inside of the radiator may also be dirty, or the radiator may be blocked by lime deposit; clean the radiator or remove the lime deposit. The thermostat may also be failing; check the thermostat and change it if necessary.
Why is the engine output weak on my Zoomlion ZCC1800?
If your Zoomlion Construction Equipment engine outputs weakly, the charge-air pressure sensor may have failed. The temperature sensor may also have failed. If the fuel temperature is too low or the temperature of antifreeze coolant is too high, check the temperature sensor and change it if necessary and check the fan speed switch. The brake valve of the engine may also be failing; make a visual check or functional check. The fuel supply system may also be clogged or leaking oil; check the fuel supply system for oil leaks.
What does it mean if my Zoomlion Construction Equipment engine emits white smoke?
If your Zoomlion Construction Equipment engine is emitting white smoke, it suggests there's a leakage at the cylinder head or the cylinder-head gasket, allowing antifreeze coolant to enter the combustion chamber. To address this, use compressed pressure to test the cylinder.
Why is the crawler slipping on my Zoomlion Construction Equipment?
If the crawler of your Zoomlion Construction Equipment is slipping, it could be because the crawler is slack, so adjust the crawler tension. Alternatively, the track pad may be worn, so change the track pad.
Why does the charge indicator light turn on while my Zoomlion ZCC1800 engine is running?
If the charge indicator light illuminates while your Zoomlion Construction Equipment engine is running, the conveying belt may be slack; check its tension and replace the driven sprocket if needed. Alternatively, the conveying belt may be worn, requiring replacement. It's also possible that the generator or voltage stabilizer has failed.
Why is my Zoomlion ZCC1800 making abnormal sounds?
If your Zoomlion Construction Equipment is making abnormal sounds, there could be leakage in the air intake pipe and exhaust pipe; repair the leaking points and change the sealing elements if necessary. Alternatively, the turbine or air compressor may be scraping against the cover, an object may have entered the turbine or air compressor, or the bearing may be stuck into the rotary components.
General| Brand | Zoomlion |
|---|---|
| Model | ZCC1800 |
| Category | Construction Equipment |
| Language | English |
Outlines general safety rules and precautions for maintenance and service work.
Provides essential precautions to ensure safe and effective maintenance procedures.
Covers maintenance procedures for the engine, fuel, cooling, air intake, and exhaust systems.
Details inspection and maintenance for winch reducers, brakes, and theoretical service life.
Provides procedures for maintaining the slewing reducer and slewing ring, including lubrication.
Details routine inspections, oil tank maintenance, and procedures for pipes, cylinders, and hoses.
Covers maintenance of illumination, limit switches, battery, and prevention of electrical fires.
Lists common mechanical drive issues and their causes and solutions.
Addresses problems related to the engine starting, operation, and performance.
Provides solutions for issues with hydraulic system pressure, movements, and components.
Covers troubleshooting for cab electrics, slewing table, boom electrics, and load moment limiter.
To Next Page
