O
p
erator’s M
a
nu
a
l for
Rough Terrain
Cr
an
e
Controls and
instruments
6.2.4 STEERING WHEEL AND COMBINATION SWITCHES
6.2.4.1 STEERING WHEEL
A. The crane has a hydraulic booster system which makes it easy to turn the crane in all
conditions.
DO NOT adjust the steering column while you move the crane. This can kill you.
B. You can adjust the steering wheel height and inclination when you push the pedal at the
bottom of the steering column. Lock the steering column after adjustment.
6.2.4.2 COMBINATION SWITCHES
Refer to Figure 6-9.
Figure 6-9 Combination Switches
1. GEAR SELECTOR – Use to control the transmission gear selection. Pull in the direction of
the operator for reverse. Push in the direction of the dash for forward. Turn the handle to
set the speed. Refer to Figure 6-10.
Figure 6-10 Gear Selector
ZRT850 Rough Terrain Crane 6-13