zortrax Inventure User Manual (English)

Other manuals for zortrax Inventure

Preparation For The First Use17 pages

Manual10 pages

Questions and Answers:

C
Carol SmithAug 29, 2025
What to do if my zortrax Inventure says '#175 Support material jam error. Extruder failure'?
- M
  Michelle CrawfordAug 29, 2025
  If you see '#175 Support material jam error. Extruder failure' on your Zortrax 3D Printer, it means the support material is blocked in the extruder. Try unloading and reloading the support material. Also, prepare the file in the latest Z-SUITE version and consider replacing the support material nozzle. If the problem continues, contact your Reseller/Distributor.
S
Sarah SmithAug 28, 2025
What to do if my zortrax Inventure says '#174 Model material jam error. Extruder failure'?
- A
  Amanda ElliottAug 28, 2025
  If your Zortrax 3D Printer displays '#174 Model material jam error. Extruder failure', it means the model material has been blocked in the extruder. Try unloading and reloading the model material. Also, prepare the file in the latest Z-SUITE version or replace the model material nozzle. If the problem persists, contact your Reseller/Distributor.
F
franklin35Aug 27, 2025
What to do if my zortrax Inventure says '#153 Support material cartridge not loaded'?
- T
  Tracy DavisAug 28, 2025
  If your Zortrax 3D Printer displays '#153 Support material cartridge not loaded', it means the support material cartridge is either missing or not properly seated. Ensure the correct support material cartridge is installed in the right place. If the problem persists, try installing a different support material cartridge.
S
Steven HernandezAug 27, 2025
What to do if my zortrax Inventure 3D Printers says '#152 Model material cartridge not loaded'?
- N
  natalie73Aug 27, 2025
  If your Zortrax 3D Printer shows '#152 Model material cartridge not loaded', it means the model material cartridge is either missing or not properly seated. Make sure the correct model material cartridge is installed correctly. If the issue persists, try installing a different model material cartridge.
M
mark68Aug 26, 2025
What to do if my zortrax Inventure 3D Printers shows '#161 The model material cartridge is empty'?
- S
  Stephanie BestAug 27, 2025
  If your Zortrax 3D Printer displays '#161 The model material cartridge is empty. Press any button when ready to load a new cartridge', it indicates that the model material cartridge has run out of material. You can resolve this by using a different or a new model material cartridge.
D
Dr. Michael MorganAug 25, 2025
What to do if my zortrax Inventure say '#106 Please prepare the file using a newer Z-SUITE version'?
- D
  David SalazarAug 26, 2025
  If your Zortrax 3D Printer shows '#106 Please prepare the file using a newer Z-SUITE version', it means your Z-SUITE software is outdated. To fix this, update the Z-SUITE to the latest version and prepare the file again.
A
Alexander JonesAug 23, 2025
Why does my zortrax Inventure 3D Printers say '#105 Please update the Firmware to print'?
- S
  Suzanne OrtizAug 23, 2025
  If your Zortrax 3D Printer displays '#105 Please update the Firmware to print', it's because the Z-SUITE is blocking the printing process for older Firmware versions due to safety concerns. To resolve this, update the Firmware.
S
Sharon LindseySep 15, 2025
What to do if my zortrax Inventure says '#115 Left hotend heating error (timeout)'?

zortrax Inventure Specifications

General

Nozzle width	0.4 mm
Print technology	Layer Plastic Deposition Plus (LPD PLUS)
Printing material	ABS, Acrylonitrile Styrene Acrylate (ASA), Nylon, Polyethylene Terephthalate Glycol (PETG), Polylactic acid (PLA)
Layer thickness (max)	0.3 mm
Layer thickness (min)	0.15 mm
Number of print heads	2
Maximum build size (WxDxH)	135 x 135 x 130 mm
Filament thickness supported	1.75 mm
3D scanner	No
Card reader integrated	Yes
Compatible memory cards	SD
Product color	Black
AC input voltage	110 / 240 V
AC input frequency	50 / 60 Hz
Power consumption (max)	300 W
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	15 - 30 °C