zortrax M Series User Manual

©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following document are registered
trademarks of Zortrax and are subject to legal protection.
19
First Use Preparations
1. Open the box and remove the cushioning material.
2. Take the 3D printer out of the box*.
When lifting or moving the printer, do not grab:
a. belts,
b. shipping clips,
c. extruder.
* Bearing in mind the printer’s weight (30kg/66lbs), Zortrax M300 should be taken out of the box or moved by two people.

zortrax M Series Specifications

General

Brand	zortrax
Model	M Series
Category	3D Printers
Language	English