zortrax M Series User Manual

©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following document are registered
trademarks of Zortrax and are subject to legal protection.
27
Firmware Installation
17. Download the latest rmware update from: http://support.zortrax.com/downloads/. To
install the rmware in your printer, upload the Update.bin le on an SD card and insert it into
the card reader in the printer. Next, turn on the printer. The installation will start automati-
cally.

zortrax M Series Specifications

General

Brand	zortrax
Model	M Series
Category	3D Printers
Language	English