zortrax M Series User Manual

©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following document are registered
trademarks of Zortrax and are subject to legal protection.
22
7. Install the platform onto the bolts marked in the picture.
NOTE! REMEMBER THAT THE PLATFORM SHOULD BE INSTALLED IN YOUR DEVICE WITH
THE PERFORATED PLATE AND ITS FIVE SILVER CALIBRATION SQUARES DIRECTED UP.
8. Plug the heatbed cable in.

zortrax M Series Specifications

General

Brand	zortrax
Model	M Series
Category	3D Printers
Language	English