zortrax M Series User Manual

©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following document are registered
trademarks of Zortrax and are subject to legal protection.
38
8. Close the front cover and plug the power cable in.
NOTE! ONCE THE PRINTING PROCESS IS FINISHED, UNLOAD THE MATERIAL AND TAKE THE SPO-
OL OFF OF THE SPOOL HOLDER, SECURE THE END OF THE MATERIAL AS IT IS SHOWN IN THE
PICTURE TO AVOID HAVING TANGLED THREADS OF MATERIAL ON THE SPOOL.

zortrax M Series Specifications

General

Brand	zortrax
Model	M Series
Category	3D Printers
Language	English