©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following document are registered
trademarks of Zortrax and are subject to legal protection.
50
Temperature
Maximum Printing Temperature (extruder) 290° C [554° F]
Build Platform Heated
Maximum Platform Temperature 105° C [221° F]
Ambient Operation Temperature 20-30° C [68-86° F]
Storage Temperature 0-35° C [32-95° F]
Electrical
AC Input M200 M300
110 V ~ 4 A 50/60 Hz
240 V ~ 1.7 A 50/60 Hz
110 V ~ 5.9 A 50/60 Hz
240 V ~ 2.5 A 50/60 Hz
Maximum Power Consumption 200 W 320 W
Software
Software Bundle Z-SUITE
Supported File Types .stl, .obj, .dxf, .3mf
Supported Operating Systems Mac OS X / Windows 7 and newer versions
Additional Information
M200 M300
each delivered printer may have worked up to
50 hours during the quality control test prints
each delivered printer may have worked up to
90 hours during the quality control test prints
*It should be noted that the model’s dimensions strongly depend on the technical condition of the printer as well as the shape,
form and size of a print, the material used and the printing process conditions. The Z-axis accuracy does not include a tolerance
of +/- one layer. Bear in mind errors of measurement and measuring equipment.
**measurements were taken with an angle of 90°
To Next Page
Loading...
Need help?
General
