©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following document are registered
trademarks of Zortrax and are subject to legal protection.
7
This warning symbol indicates that special care should be taken when re-
pairing the device. Also, it points out an important step to be carried out
The printer needs to be placed on a at and stable surface to ensure
proper quality of the prints
Hot surface. Do not touch
Do not reach into moving elements
Safe Storage and Transport Guidance
Zortrax devices must be stored between 0 and 35⁰ C [32 - 95⁰ F]. The storage space should be free of
moisture and other extreme conditions.
Transport Instructions
When stacking several devices on a pallet, follow the instructions provided on the packaging. One
device may weigh more than 20 kg [44 lbs]. It is therefore advisable to provide safe pallet storage but
not higher than 1.7 m [5’7”]. It should be noted that the packages must not project beyond the outline
of the pallet. Packages stacked on the pallet should be then bound together and wrapped in foil. The
pallet prepared as above can be then forwarded to the shipping company.
Pallet stacking and destacking should be carried out by two people. The package with the device
should be lifted or moved using special handles.
Electromagnetic Compatibility (EMC)
Each Zortrax printer complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inter-
ference received, including interference that may cause undesired operation.
To Next Page
Loading...
Need help?
General
