Need help?Do you have a question about the ZOSI C190 and is the answer not in the manual?
Steps to power on the camera and select the correct model in the app to begin adding.
Use QR code scanning or manual UID entry to identify the device during the setup process.
Steps to connect the camera to a Wi-Fi network using the app's interface.
Procedure for scanning a QR code with the camera to complete the Wi-Fi setup.
Verify successful device connection and addition to the app for operation.
Connect to the AP hotspot and configure Wi-Fi settings for the device.
Steps to power on the camera and select the correct model in the app to begin adding.
Use QR code scanning or manual UID entry to identify the device during the setup process.
Steps to connect the camera to a Wi-Fi network using the app's interface.
Procedure for scanning a QR code with the camera to complete the Wi-Fi setup.
Verify successful device connection and addition to the app for operation.
Connect to the AP hotspot and configure Wi-Fi settings for the device.
General| Audio | Two-way audio |
|---|---|
| Connectivity | Wi-Fi |
| Weatherproof Rating/Weather Resistance | IP66 |
| Lens | 3.6mm |
| Power Supply | DC 5V/1A |
| Motion Detection | Yes |
| Resolution | 1080P (1920x1080) |
| Night Vision | Up to 65 feet |
| Storage | Supports up to 128GB microSD card |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Remote Access | Yes, via ZOSI app |
To Next Page
