25
FLASH Update Procedure
The program AFUDOS XX.ROM is included on the driver CD (D:\Utility\AFUDOS
XX.ROM). Please follow the recommended procedure to update the ash BIOS, as
listed below.
1. Create a DOS-bootable oppy diskette. Copy the new BIOS le (just obtained or
downloaded) and the utility program AFUDOS XX.ROM to the diskette.
2. Allow the PC system to boot from the DOS diskette.
3. At the DOS prompt, type
AFUDOS XX.ROM /P /C /B /N /X <ENTER>
Note: XX (the BIOS le name) can be dened by users.
4. Wait until the ash-update is complete.
5. Restart the PC.
- Do not turn off or RESET the computer during the ash process.
- If you are not sure how to upgrade the BIOS, please take your
computer to an Authorized Service Center and have a trained
technician do the work for you.
Warning:
Conguring the BIOS
To Next Page
Loading...
