ZOTAC ZBOX
14
4. Connecting a DisplayPort display
Connect the DisplayPort connector to the DP port of the monitor or display.
5. Connecting to an HDMI display
Connect one end of an HDMI cable to an HDTV or monitor, and the other end to the HDMI
port on the system rear panel.
6. Connecting the power adapter and turning on the ZBOX
Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press
the power switch on the front panel to turn on the system.
When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the AC outlet
to conserve power.
To Next Page
Loading...
Need help?
General
