16
Your AT&T Home Base comes with standard three-way calling and call waiting. Operation of these
features will vary depending on your home phone equipment.
If your phone does not have a Flash (or Phone/Talk) key, then use the off-hook mechanism
supported by your phone.
Call Forwarding
To forward all calls, dial:
1. *21*
2. The 10-digit number to which you wish to forward your calls
3. # key
(Example: *21*1234567890# forwards your calls to the phone number 123-456-7890)
Please wait at least three (3) seconds and you hear a confirmation tone for the forwarding to complete
before hanging up.
To un-forward calls, dial #21#, please wait at least three (3) seconds and you hear a confirmation tone for
the un-forwarding to complete before hanging up.
Note: Applicable wireless minute plan rates apply to forwarded calls.
Call Log
You can view incoming and outgoing calls placed to and from your AT&T Home Base at att.com/myatt,
or on the AT&T Home Base Manager. To view call details on the AT&T Home Base Manager, enter
http://att.wirelessinternet directly into your browser address field on any device that is connected to
your AT&T Home Base. Log in using "attadmin" (or your customized login) and go to Call Log.
Internet Access
Connect Other Devices
You can connect up to 20 Wi-Fi enabled devices simultaneously to your AT&T Home Base, including
smartphones, tablets, laptops, etc.
1. Open the Wi-Fi network manager on your Wi-Fi enabled device.
2. Find and select the Wi-Fi network name (SSID) ATT-WI-XXXX / ATT-WI-XXXX-GUEST.
Note: Your device support 2.4G wireless network and 5G wireless network. You can connect to 10
Wi-Fi enabled devices in 2.4G network and connect to 10 Wi-Fi enabled devices in 5G network
simultaneously.
3. When prompted, enter the Wi-Fi password found on the bottom of the AT&T Home Base.
To Next Page
Loading...
