Zte Blade 10 - Connecting to Networks and Devices; Connecting to Mobile Networks

43
Connecting to Networks and Devices
Connecting to Mobile Networks
Control Mobile Data Use
1. From the home screen, touch Settings > Network & internet >
Mobile network.
2. Touch the Mobile data switch to enable or disable mobile data
use.
Check Access Point Names
To connect to the Internet you can use the default Access Point
Names (APN). From the home screen, touch Settings > Network &
internet > Mobile network > Advanced > Access Point Names to
check the default APN.
NOTE:
To set the APN to default settings, touch > Reset to default.
Select Network Operator
1. From the home screen, touch Settings > Network & internet >
Mobile network > Advanced.
2. Touch to turn off Automatically select network.
3. Wait for the phone to search for available networks and touch a
network in the network list to register manually.