148
body as described in this user guide**.
As SAR is measured utilizing the device’s highest transmitting
power, the actual SAR of this device while operating is
typically below that indicated above. This is due to automatic
changes to the power level of the device to ensure it only uses the
minimum power required to communicate with the network.
* The tests are carried out in accordance with EN 50360, EN
62311, EN 62209-1, EN 62209-2.
** Please see body worn operation.
Body Worn Operation
Important safety information regarding radio frequency radiation
(RF) exposure:
To ensure compliance with RF exposure guidelines the phone
must be used with a minimum of 10 mm separation from the
body.
Failure to observe these instructions could result in your RF
exposure exceeding the relevant guideline limits.
Distraction
Product Handling
General Statement on Handling and Use
You alone are responsible for how you use your phone and any
To Next Page
Loading...
