White blinking: WPS function is on.
Off: The WLAN function is off.
4>POWER
Steady white light : The external power supply is connected, and the equipment power supply is working.
Off: Turn off the power of the device.
5>WPS
Short press to turn on the WPS function.
Long press for about 10 seconds to shut down.
6>External Antenna
Connect an external antenna
7>Network Port
Connect to the computer. In the wired broadband mode, it can be connected to the operator provided broadband
service.
8>Power Connector
Connect the power adapter.
9>Nano-SIM card slot and Reset hole
Install the nano-SIM card.
Reset hole: Long press for about 3 seconds to restore.
To Next Page
Loading...
